sialon ceramics logo animated 2

31 in stock (can be backordered)

Please describe in detail your request for quotation:

Remove

Sialon Galvanizing Hooks

Silicon Nitride galvanizing hooks have found extensive use in non-ferrous molten metal handling

Particularly aluminum and its alloys, including metal feed tubes for aluminum die casting, burner and immersion heater tubes, injector and degassing for nonferrous metals, thermocouple protection tubes, crucibles and ladles.

Share:

Description

Best Sialon Galvanizing Hooks at Affordable Price:

Strong Sialon II ™ (or silicon nitride like) hot dip galvanizing hooks are typically used in the non-ferrous industry during aluminium galvanizing. This method modifies the surface properties of e.g. aluminum and steel. This technique is generally applied to piston rings.

Visit the Shop page for more products

Sialon data sheet

Material data sheet Sialon (Si3Al3O3N5)
Typical Sialon grades NVD-001 NVD-002 NVD-003 NVD-004
Bulk Density g/cm3 3.2 3.1 3.3 3.2
Water Absorption 0 0 0 0
Flexural Strength MPa 580 900 1,020 790
Vickers Hardness HV1 GPa 13.9 12.7 15.0 13.8
Fracture Toughness (SEPB) MPam1/2 4 ~ 5 6 ~ 7 7 6 ~ 7
Young’s Modulus of Elasticity GPa 290 270 300 290
Poisson’s Ratio 0.28 0.28 0.28 0.28
Coefficient of Linear Thermal (40 – 800 °C)

Expansion

×10-6/℃ 3.2 3.4 3.3 3.5
Thermal Conductivity (20℃) W/(m・k) 25 23 27 54
Specific Heat J/(g・k) 0.64 0.66 0.65 0.66
Heat Shock Resistance 550 800 800 900
Volume Resistivity (20℃) Ω・cm >1014 >1014 >1014 >1014

Download brochure

Please visit our brochure page to get a free download!

QR Code

QR Code

Other Sialon products you may like

Don`t copy text!

Download the NEW Sialon ULTRA™ brochure

ALPUR rotor shaft

10% OFF introduction discount until 30 September 2022!

  • 30% higher impact fracture toughness.

  • Polished surface for even better non-wetting properties

  • 12 months warranty against chemical attack.

  • High tolerance grinding up to 0.1 mm