Ultrasonic Degassing Molten Aluminum

20% increase in production speed, no centerline segregation!

New publication about Ultrasonic Degassing of molten aluminium. REGISTER NOW.

New ultrasonic generator technology for homogenizing, ultrasonically assisted Metal treatment, Continuous Casting, Mixing, Forming and ultrasonic degassing, Direct Chill casting (DC casting) without any center line segregation, conventional degassing and grain refiners! More on our YouTube channel

Ultrasonically assisted micro alloying also opens new ways to the development of the next generation automotive alloys. 

We have developed a new technology for ultrasonic degassing molten aluminum  that applies high power ultrasonic energy to large, heavy irregular mass or un-tuned mechanical systems such as extruder, syalon sialon silicon nitride drawing die, mold tools, metal melt mixer, continuous casting, homogenizing, degassing, alloying, very fine and homogeneous micro crystallization, sintering, etc .

Such ultrasonic driving creates uniform and homogeneous distribution for ultrasonic degassing molten aluminum of acoustical activity on the surface and inside of the vibrating system, while avoiding the creation of stationary and standing waves, so that the whole vibrating system is fully agitated. 

Leave a Comment

© 2019 www.sialon.com

12 months warranty

With integrated thermocouple

Sialon Immersion Heater

12 months warranty against electrical defects!